After buying a pool, its owner will be faced with the issue of proper maintenance. Previously unknown concepts like pH, alkalinity, acidity, and chlorine levels will become part of their life. The longevity of their pool is directly dependent on how effectively it can deal with the problems that arise.
One of the main issues is the high pH level. It can be lowered with muriatic acid. Despite the fact that there are many different ways to lower pH (for example, diluting), we decided to stop at one of the most effective, cheap, and safe method – muriatic acid.
In this article we will tell you why it is important to keep the pH balanced, why high pH is bad, how much muriatic acid you need to add to lower the pH, list the cautions for use, and clarify how to control the pH level.
Let’s remember at once what pH is. It is the “hydrogen potential”. What does this have to do with hydrogen? It is an “H” which is one of the main components of water (the water formula is H2O). A small concentration of H in water turns it into an acid, while a large one turns it into heavy water.
Heavy water is water that has a lot of minerals and other particles in it. These can cause scaling and other chemicals to dissolve ineffectively.
On the chart above, a scale for measuring this pH is shown, where 7 is the average pH that is inherent in distilled water. Anything below 7 is more acidic and anything above that is more alkaline. For a swimming pool, the normal pH is 7.2 to 7.6.
High acidity turns your water into a corrosive agent for iron and other materials. Accordingly, it is undesirable to bathe in such water, because it can harm your skin as well. High alkalinity makes the water hard because the concentration of minerals in it increases dramatically. This can cause clogs and problems with the water supply.
To reduce the alkalinity, it is worth using muriatic acid. It literally “acidifies” the water and lowers the pH. We explained how muriatic acid interacts with water with a high pH further in the article.
That’s why it pays to keep the pH balance in your pool!
Let’s get back to the topic at hand. We are interested in high pH and why it is bad. So let’s first find out what causes the hydrogen concentration in the water to increase:
Now let’s find out in detail what increased alkalinity in the pool water can lead to.
Muriatic acid is used to lower the pH. It reduces the amount of low-soluble salts in the hard water and increases the acidity to balance the pH value. It is important to note that muriatic acid is a cheap method that has its disadvantages. For example, its improper use can harm both the pool and your health.
Before you find out how much muriatic acid you need, you should calculate the volume of the pool or the hot tub and the current pH value. Below we explain in detail how to do it and how these values will affect the amount of muriatic acid to be added.
To know how much muriatic acid you need to add, you should measure the pool volume and its pH level.
The following are formulas for calculating the volume in gallons based on the shape of the pool (in feet).
To calculate the volume of an irregular or kidney-shaped pool you can conditionally divide it into simple shapes (circle, oval, square, or rectangle), calculate the volume of each and summarize.
Next, you should measure the pH level. You can use test strips, a drip DPD test, or an “acid requirement” test for this.
Now you can compare your results to the tables and find out how much muriatic acid you need to add to lower the pH in your pool or in your hot tub.
Volume/pH | 7.6 – 7.8 | 7.8 – 8.0 | 8.0 – 8.4 | >8.4 |
150 gal | 0.2 oz. | 0.25 oz. | 0.4 oz. | 0.5 oz. |
400 gal | 0.5 oz. | 0.7 oz | 1 oz. | 1.25 oz. |
600 gal | 0.7 oz. | 1 oz. | 1.5 oz. | 2 oz. |
800 gal | 1 oz. | 1.25 oz. | 2 oz. | 2.5 oz. |
To lower the pH in pools, people use the muriatic acid with a lower concentration of hydrogen chloride. However, it is still very corrosive and can damage pool finishes, clothing, skin, and cause respiratory tract burns.
To prevent harm to yourself and your pool, we have compiled a list of must-read cautions before using muriatic acid.
You can check the pool’s pH level at home. You can buy special kits at any industrial store. There are 3 such test kits and we will tell you about them in detail below.
A high pH level is harmful to the pool and the people who swim in it. It can cause limescale to form, which will clog filters and heaters, appear cloudy water, which will breed bacteria, and so on.
High pH levels in the pool can be effectively dealt with by using muriatic acid. It lowers the alkalinity of the heavy water to a perfect pH of 7.2 to 7.6. However, it is important to use muriatic acid carefully so it does not harm your pool or your health.
In this article, we’ve listed why you should balance the pH, why high pH is bad, how much more muriatic acid you should add depending on the pool water volume and the current pH, the cautions for using muriatic acid, and how to control the pH.
You need to measure the volume of your pool, and the current pH level, and compare it to the table’s indicators in our article.
The normal pool pH is 7.2-7.6, which is close to the distilled water – 7 pH.
High pH levels can cause cloudy water, begin to form scales that will clog filters, pool cleaning and maintenance products to drop ineffectiveness, and irritate the mucous membranes of the eye.
Multiple medical studies warn that improper use of hot tubs can lead to birth defects. Find out how to minimize…
Are you confused by the sheer amount of chemicals for inflatable hot tubs? We gathered a simplified list of the…
Our team has analyzed top-5 generators to help you choose the best one. With a salt chlorine generator, you’ll love…
An engineer's approach to converting your hot tub to saltwater – Check our 5-step guide on how to do it…
Presenting you 30+ fun accessories to enhance your hot tub experiences with family and friends! These little extras are surely…
Are you considering purchasing a hot tub chemical kit to avoid the confusion of buying 10+ different items separately? Here…